I finished up the 3link today.  I fabbed 2 brackets. 1 For the upper panhard mount and 1 for the axle panhard mount. I fabbed both from 3x5 square stock i had in the basement. I then fabbed the shock mounts. The lowers I bought from ballistic fab and the uppers i made from some 2x2 sq stock. The brakes are the only thing left.  Pics below

Upper Mount sitting on the 3x5 stock i cut it from.

Upper mount welded to the frame. (I had to make it low profile enough so it could clear the spring)

The lower panhard mount.  Pretty basic.

Panhard Link

Pic of mounts installed.

Shock mounts..  Kinda crappy but they work. I had to make them long so they would clear the spring.

C before I welded the lower shock mounts to them.

Shock installed.!

Lower mount with link

Upper mount with link

Front View

3qtr view. 

Thats the 3link done.  I have bent the brake lines and have to get the fittings for the MC.  Hopefully this week I get to test it out in the yard.  I still have to cut the junk off the front.

Hopefully it will work well.

L8r.