Blog Entries Minimize
Print  

Blogs By Date Minimize
Print  

Search Blog Minimize
Print  

Blog    
Most recent blog entries Minimize
Radiator, Winch plate and dash bar...
Wesley's Blogs Ftoy #510 By host on 12/28/2007 11:19 PM
I mounted the radiator, built a winch plate and cut the dash bar. Then I had to quit to go get steel.. Got to the steel yard and they closed early today :(. So I wasted 2 hours..
More...
Mounted Peddles, Seats and Steering today.
Wesley's Blogs Ftoy #510 By host on 12/27/2007 11:36 PM
Today I mounted the seats, peddles and steering. I look at other builds to get the design for the peddle bracket. Its really nice to sit in the drivers seat now and know what it gonna feel like to drive it :)
More...
Chassis Mounts and Floor
Wesley's Blogs Ftoy #510 By host on 12/26/2007 10:46 PM
I made some chassis mounts that allow me to remove the chassis from the frame while I'm building. Then I built the floor frames and started the frames for the seats.
More...
Chassis Sitting on the frame.
Wesley's Blogs Ftoy #510 By host on 12/25/2007 12:09 PM
Put the chassis on the frame tonight so I could starting designing the floor system and the firewall etc.
More...
Tcase Xmember Test Fit
Wesley's Blogs Ftoy #510 By host on 12/24/2007 11:50 PM
I took a few minutes and put the tcase Xmember in place to test fit it.
More...
Finished Tcase Crossmember
Wesley's Blogs Ftoy #510 By host on 12/23/2007 2:06 PM
I turned down some bushings to fit in the odd size DOM and then build some tabs and finished the cross member.
More...
Mono Wheel motorcycle trailer Day 3
Wesley's Blogs Misc Projects By host on 12/19/2007 12:02 AM
Finished up the trailer tonight. Installed a floor, painted it and installed a light and wiring.
Comments (1) More...
Mono Wheel motorcycle trailer Day 2
Wesley's Blogs Misc Projects By host on 12/18/2007 11:57 PM
Designing and building the hitch that allows the trailer to work.
Comments (0) More...
Fabbing Tcase crossmember Day 1 and doing some axle work again.
Wesley's Blogs Ftoy #510 By host on 12/17/2007 6:53 PM
Build this out of 1 7/8's DOM tubbing so its pretty beefy. Also welded on a fill plug for the front axle and did some work on the pass spring hanger.
More...
Mono Wheel motorcycle trailer Day 1
Wesley's Blogs Misc Projects By host on 12/15/2007 11:50 PM
Today I started building this mono wheel motorcycle trailer for my father-in-law. It's designed to track with the motorcycle as it leans through the curves. He mentioned a trailer before but didn't want one because of the way it would track so I decided to build him one that would work a little better.
Comments (0) More...
Print  

  Home|Blog|Photos|Family|FToy|Guestbook
Copyright 2006 by Wesley Combs Terms Of Use Privacy Statement